Upload your files
Upload or drop CAD files here. Or use saved designs.
Two color acrylic is modified with styrene to improve impact resistance and flexibility. This also lowers the melting point of the material and means the material along the cut edge is not as cleanly vaporized as with standard acrylic. Great for engraving details such as text and labels, two color acrylic is cut without paper on the top surface as it produces the best engraving results. Caution is advised for very detailed, intricate cut outs & large areas of engraving as the build-up of heat can cause the sheet to deform. Large engraved areas may result in powder build-up which may need additional cleaning once parts are received.
Same day turnaround
Same day turnaround
Design specifications1.50mm3.00mm
Maximum sheet size
600.00 x 300.00mm
Kerf width
0.20mm
Minimum thickness
2.80mm
Maximum thickness
3.20mm
Minimum overall part
6.00mm
Minimum feature size
1.00mm
Minimum engraving detail
1.00mm
Mechanical properties
Ultimate tensile strength
70 MPa
Yield strength
70 MPa
Young's modulus
2.90 GPa
Elongation at break
8 %
Hardness
96 HNC
Physical properties
Corrosion resistance
Moderate
Magnetism
No
UV resistance
Good
Density
1.18 g/cm3
Electrical properties
Electrical resistivity
14-16 x 10^15 Ohm.cm
Post treatments
Affixable Properties
Chemical, Mechanical
Thermal properties
Maximum service temperature
60 – 90 °C
Thermal expansion coefficient
65 µm/m-°C
Thermal conductivity
0.19 - 0.2 W/(m⋅°C)