PETG - Clear
0.02 inches 0.04 inches 0.06 inches 0.08 inches
What is it
PETG is a clear thermoplastic polyester with a glossy finish.
Design notes
PETG has high Impact strength and is reasonably flexible. It can be formed with and without heat although tight bend radii could result in splitting and stress marks on along the folded edge. It has a low melting point so intricate cutting detail is not recommended. Vector engraving is favored over raster engraving and intricate details are not recommended
Typical uses
Point of Purchase Displays - Flat wall components - Product Dispensers - Food container - Bicycle Helmets - Prosthetic devices
Environmental info
PET can be recycled in some areas.
Adhesives, joints & fastenings
PETG can be bonded using Weldon 7.
Material info (in inches)
Thicknesses available:
- 0.02 inches
- 0.04 inches
- 0.06 inches
- 0.08 inches
Sizes available:
- P1 7.1 x 7.1
- P2 15.1 x 15.1
- P3 31.1 x 15.1
Pricing:
| P1 | P2 | P3 | |
|---|---|---|---|
| 0.02 inches | $1.50 | $3.00 | $4.52 |
| 0.04 inches | $2.00 | $3.50 | $6.78 |
| 0.06 inches | $2.50 | $5.00 | $9.46 |
| 0.08 inches | $3.00 | $7.00 | $12.14 |
What will it cost to make?
Example product:
2 Spinning Tops
|
|
| Materials needed: 1 x P1 0.12inches Red Acrylic | $2.50 |
| Making costs: | $8.41 |
| Total USD $10.91 Excludes shipping & sales tax | |
The costs shown here are intended as a guide, so if you decide to make 'something like this only slightly different' your costs will change.
Tips from other designers
You need to sign up and be logged in to leave a tip.